SonoLab EERS PCS-150 Custom Molded Earphones (NRR 26)

The 5-Minute Custom Fit EERS puts the power of a perfect fit in your hands with the Safe and Comfortable SonoFit™ Fitting Process. In just 5 minutes, you can create your own custom-fitted EERS PCS-150 earphones! Everything you need is in the box. There's no mess, and no putty to mix. What would normally take weeks of visiting audiologists or mailing kits back and forth can now be done by yourself, in about the amount of time it takes to make a sandwich. Enhanced Bass for Rocking & Moving With a powerful single driver, dynamic speaker in each ear, PCS-150 delivers crisp and detailed sound with hard-driving bass. With the earpieces nestled perfectly into each ear, you'll be able to hear your music more clearly than ever before -- and the earphones won't slip or fall out when you move. And with their single button in-line microphone, these custom earphones are mobile-compatible and ready to go. A Note on Volume: EERS PCS-150 custom-fit earphones create a Sound Isolation "Acoustic Seal" inside the ear, preventing the sound from escaping, and causing listening levels to be perceived as louder. It is a good idea to turn down the volume on your device before putting these earphones in your ears; with EERS, you will find you can hear clearly and enjoy your music at a lower volume than before. PCS-150 Technical Specifications Noise Protection NRR 26
Typical nominal impedance 90 ohms
Sensitivity 103 dB SPL /100 mVrms @1 kHz
Maximum output level 115 dB SPL
Frequency Response 18 Hz - 16 kHz
Cable 1.3 m (50 in.) kink-resistant with in-line microphone
Connector 3.5mm (1/8") gold-plated stereo jack
Typical Weight Approx. 15 g (0.53 oz)
PCS-150 SpecSheet PCS-150 What's in the Box 1 SonoFit™ Fitting System
1 pair of PCS-150 earphones (pre-loaded in SonoFit™)
1 carrying pouch
1 user manual
1 quick-fit gude
1 year limited manufacturer's warranty More Custom Molds & Custom Earphones